Search:
Home > Product center > Other Lightning Protection Met >

Product

Earth Resistance Series
Insulation Resistance Series
High Voltage Test Series
DC Low resistance Series
Power Quality Analysis Series
Clamp Current Meter Series
Current Sensor Series
Other Lightning Protection Met
FR9010
ES9020
FR2060
ES5012
ES9050
Other Lightning Protection Met
Non-contact phase sequence meter
FR2060
Function: Phase detection (normal phase, reverse phase), live line inspection, simple electricity inspection, phase loss judgment, circuit breaker search, breakpoint location, and line maintenance
Measure mode Non-contact clipping method
Live electricity range AC 70~1000V
Clampable wire size External diameter ø1.5mm~ø48mm
Illuminated buzzer Have

FR2060非接触式相序表主机 FR2060非接触式相序表主机
FR2060非接触式相序表钳子 FR2060非接触式相序表钳子
FR2060非接触式相序表包装 FR2060非接触式相序表包装
Function Phase detection (normal phase, reverse phase), live line inspection, simple electricity inspection, phase loss judgment, circuit breaker search, breakpoint location, and line maintenance.
Power 9V battery, continuous use time is about 70 hours.
Measure mode Non-contact clipping method
Wire position The measured wire is in the center of the jaw
Frequency 50Hz/60Hz Automatic Identification
Live electricity range AC70~1000V,45/65Hz(Sine wave continuous input),Conducted electrostatic detection
Measuring the highest voltage AC1000V
Clamp wire size Outside diameter ø1.5mm~ø48mm
Display 【Positive phase】4 phase detector lights are turned on in a clockwise direction;
【Reverse phase】4 4 phase detection lights are turned on counterclockwise;
【Live electricity】L1, L2, L3 lights in the voltage setting range;
【Lack of phase】L1 or L2 or L3 lights are not lit;
【Open circuit】L1 or L2 or L3 lights are not lit
Beep 【Positive phase】The instrument emits intermittent short beep;
【Reverse phase】The instrument emits a continuous long beep。
Battery check After the power is turned on, the power indicator is on; the battery is low; the LOW BATTERY lamp is on。
Clamp lead length 0.6m
Instrument size L 117.6mm×W 81mm×T 25mm
Automatic shut-down After about 6 minutes of power on, the meter automatically shuts down to reduce battery consumption.
Battery voltage When the battery voltage drops to about 5.2V, the battery voltage is low symbol to remind to replace the battery
Instrument weight Instrument:260g(including battery)
Maximum rated power 300mVA
Working temperature and humidity -10℃~55℃;below 80%rh
Storage temperature and humidity -20℃~60℃;below 90%rh
Insulation strength 3.7kVrms
Suitable for Safety Regulations EN61010-1:2001、EN61010-031:2002、pollution grade 2、CAT Ⅲ(600V)、Instant overvoltage 6000V。
 

Legal notices Contact Us About US ©Guang Zhou ZhengNeng Electronic Technology Co., Ltd. All rights reserved  粤ICP备15057403号-6      Tel:020-37319325