Search:
Home > Product center > High Voltage Current Tester >

Product

Earth Tester
SPD Field Tester
DC Resistance Tester
High Voltage Current Tester
FR1000
FR1001
ES1010
Phase VA Meter
Phase Detector
Digital Insulation Tester
Digital Current Recorder
Current Sensor
High Voltage Current Tester
Wireless high and low voltage current ratio tester
ES1010
Function Current, ratio, polarity, phase, and online test of high and low voltage current transformers and secondary circuits
High voltage range: 0.0mA~1200A
Low voltage range 0.0mA~20A
High voltage clamp jaw φ50mm
Low voltage clamp jaw: φ8mm
Shift Automatic shift
Line voltage the line below 60kV

ES1010无线高压变比测试仪主图 ES1010无线高压变比测试仪主图
ES1010无线高压变比测试仪钳口图 ES1010无线高压变比测试仪钳口图
ES1010无线高压变比测试仪附件图 ES1010无线高压变比测试仪附件图
Tester High voltage detector Host (current clamp)
Range 0.0mA~1200A(50/60Hz automatic) 0.0mA~20A
Insolution 0.1mA 0.1mA
Clamp Diameter φ50mm φ7.5mm
Test Accuracy ±2%±5dgt ±0.5%±5dgt
Sampling Speed 2 times/second
Function High-low voltage current transformer primary and secondary loop current, transformation ratio, polarity, phase, and on-line test; current and voltage ratio on both sides of transformer; on-line test; load current test
Transmission type Wireless transmission, straight line transmission distance 30m
Shift gear Automatic shift
Power DC6V 7# Alkaline battery(1.5V AAA×4) DC7.5V 5 # Alkaline battery(1.5V LR6×5)
Test mode Clamp CT
Meter Dimension  87X37X262mm(W/T/H) Host::w100X35X204mm(W/T/H)
Current clamp: 42X20X137mm(W/T/H)
Display mode LCD:128dots×64dots  Blue screen backlight function, suitable for dark places
LCD Size 62mm×44mm
Ratio Three kinds of transformation ratio display: (The primary and secondary circuit actually measured the current transformation ratio; the conversion ratio of the secondary circuit 5A; 10kV-YY transformer conversion ratio of 10kV/380V), the maximum ratio of 1:10 million
Line voltage Line test with insulation sheath below 60kV or bare wire current test below 35kV (must operate with insulation rod)
Lead wire length The lead wire of the current clamp 2 meter
Weight Total weight of instrument:3.1Kg(including insulation rob and instrument bag)
High voltage detector:370g(including battery)
Host:409g(including battery)
Current clamp:180g
Data interface USB transmission
Overflow display Over-range overflow function: "OL A" symbol display
Data storage 500 groups, press HOLD key to hold data, MR symbol display, press HOLD key to cancel hold
Data review Long press  HOLD button to enter data review mode
Data is full Data full function: "FULL" symbol display
No signal instruction "NO SIGNAL -----" is displayed when the host does not receive the transmission signal
Automatic shut-down About 15 minutes after power on, the meter will automatically shut down
Battery voltage When the battery voltage drops to 5.2V, the low-power indicator lights to remind you to replace the battery When the battery voltage drops to 5.2V, the battery voltage is low symbol to remind to replace the battery
Insulated rod Five section insulation rods (5 meters in total)
Insulation strength AC 60kV/rms
Line test Line test with insulation sheath below 60kV or bare wire current test below 35kV (operate with insulation rod)
Working temperature -10℃~40℃
Storage temperature -10℃~60℃
Relative humidity 0℃~31℃≦75%,31℃~40℃≦50%
Suitable for safety regulations IEC1010-1、IEC1010-2-032、pollution level 2、CAT Ⅲ(600V) IEC61326(EMC standard)
 

W/T/H:


Legal notices Contact Us About US ©Guang Zhou ZhengNeng Electronic Technology Co., Ltd. All rights reserved  粤ICP备15057403号-6      Tel:4000-1515-38