ES2080 series wireless high-voltage nuclear phase meter is applied to power line, substation power inspection, nuclear phase, phase test, phase sequence judgment, transformer group judgment, etc. (line voltage: 220V~220kV). The nuclear phase meter adopts wireless transmission technology, and the transmission distance can reach 30 meters; the 3.5-inch LCD color screen can display the phase, frequency, voltage and other nuclear phase results on the same screen, and the dynamic vector diagram indicates clear and intuitive; With voice prompts "X signal is normal, Y signal is normal, in phase, out of phase" and so on.
        ES2080 series wireless high-voltage nuclear phase meter to the high-voltage line nuclear phase (when the voltage exceeds 220V), the metal probe of the detector can be gradually approached to the wire. When the electric field signal is sensed, the nuclear phase can be completed. The nuclear phase result is directly displayed on the wireless receiver. When it is more than 35kV, a non-contact nuclear phase must be used to ensure safety.

I. Model Contrast

Model	ES2080	ES2080A
*Voltage measurement function	Yes	No

 
II. Technical Parameters

Function	Frequency measurement, phase measurement, phase sequence display, *voltage measurement, voltage verification
Nuclear phase mode	Contact nuclear phase: bare wire below 35kV or wire with insulating sheath below 220kV can contact the non-contact nuclear phase of the wire core. When the bare line voltage exceeds 35kV, non-contact testing must be used, and the probe is gradually approaching the core phase of the conductor.
Transmission distance	Wireless transmission, linear transmission distance of about 30 meters
Phase detect	In-phase:－25°～25°	Out of phase::95°～145° or 215°～265°
Nuclear phase voltage	70V～220kV
Phase range	0.0°～360.0°；accuracy：≤±12°；resolution：0.1°
Frequency range	45.0Hz～65.0Hz；accuracy：≤±2Hz；resolution：0.1Hz
*Voltage range	70V～35kV ；   accuracy：±10%   resolution：100V
emission frequency	433MHz、315MHz
Display mode	3.5 inch color screen
LCD display size	72mm*55mm
Instrument size	Hose 187*119*48mm
	detector 146*100*75mm
phase indication	Phasor diagrams and numbers are displayed simultaneously
Work indication	The detector has an acousto-optic indication function during the nuclear phase, a red double flash indicator and a "beep--beep--beep" beep
Data storage	300 groups, flashing "FULL" symbol indicates that the storage is full
Data review	Data review function: "READ" symbol display
Alarm function	When the measured value exceeds the alarm set value, an alarm prompt is issued.
Power consumption	Detector:30mA  Max
	Host: 150mA  Max
Instrument weight	Instrument: about 450g(with battery)
	Detector: about 240(with battery)*2
Battery voltage	When the battery voltage is low, low battery symbol will display
Automatic shut-down	automatic shutdown after 15 minutes boot
Length of insulation rod	Maximum diameter Φ38mm; length: 3 meters
Insulation test	Both ends of insulated rod after stretching: AC 220kV / rms; Host and detector: AC3700V / rms (between exposed metal and plastic case)
Working temperature and humidity	-10℃～40℃；below 70%rh
Storage temperature and humidity	-20℃～60℃；below 80%rh
Suitable for Safety Regulations	The requirements of GB13398-92, GB311.1-311.6-8, 3DL408-91 and the new national power industry standard "General Technical Conditions DL / T971-2005 for 1kV to 35kV Portable Nuclear Phase Apparatus for Live Working"
	Conforms to IEC61481－A2; 2004; IEC 61243-1 ed.2: 2003

 
 

  

Receiver	1PC
Detector	2PCS
Probe	2PC
Probe hook	2PCS
Insulating bar	2PCS
LR6 battery	5 Sections
6F22 battery	2PCS
Inspection line	1PC
Manual	1PC
Instrument box	1PC

ES2080 series wireless high-voltage nuclear phase meter

Download