Current measurement method on the transformer? [ES1001 wirel
The Zhengneng ES1001 wireless high-voltage clamp-type ammeter can measure high and low voltage AC current below 60kV.Measuring range: AC 0.0mA ~ 1200A, 200 sets of data storage, jaw size: Φ50mm, telescopic insulation rod 4 meters long, wireless reception, wireless transmission distance of about 30 meters. The following is an example of measuring the incoming current of a transformer.
I, the test project (transformer incoming current)
II, take out the ES1001 wireless high and low voltage ammeter from the bag
III. Press the red POWER button on the left receiver and the red POWER button on the right side of the high voltage clamp. The high voltage clamp is connected to the flexible insulation rod.
IV. Find the transformer inlet end and insert the high pressure clamp directly.
V. Hand hold the receiver
VI. The current will be displayed on the receiver. The current at this time is 5.49A.
VII. Rotate the shrinking insulation rod and press the POWER button on the receiver and the POWER button on the high voltage clamp to shut down.
VIII. Put instrument, insulated rod into bag, the test is over.